RU EN

Products

TRIOCOR anticorrosion materials have excellent coating and technological characteristics providing long-term efficacy of its protective components even in most challenging environments to oil and gas, infrastructure and energy facilities.

In compliance with the internationally accepted standardization system, and, namely, ISO 12944 and taking into account the corrosiveness of the environment, the type of surface to be protected, surface preparation, required lifetime the O3 specialists will select a suitable TRIOCOR coatings system to minimize the costs, to maximize efficiency and return on investments in the project.

A one-component fast drying alkyd primer containing zinc phosphate

Thin film protective coating is suitable for the protection of steelwork and aluminum substrates in a range of exposure environments from C1 to C3 (as defined in ISO 12944-2) including industrial and infrastructure facilities; can be used as a part of coating systems and also as a self-primed buildcoat (C1, indoors). Service temperatures of the coating is between minus 50°C and plus 120°C.
A one-component fast drying alkyd topcoat

Thin film protective coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C3 (as defined in ISO 12944-2) including industrial and infrastructure facilities; can be used as a part of coating systems. Service temperatures of the coating is between minus 50°C and plus 120°C.
A two-component high-structure fast drying modified epoxy primer containing zinc phosphate

As a quick drying primer or intermediate coat for especially fast recoatable in-shop applications. It is used on steel surfaces, can also be used on aluminum and galvanized surfaces.
A two-pack epoxy zinc rich primer

As a primer to give protection of steel as part of an anticorrosive coating system in severely corrosive environments up to C5-M as defined in ISO 12944-2 including industrial, oil&gas and infrastructure facilities. It has good resistance to splashes from sea water, fresh water, oil and refined products. May be used as a repair primer for galvanised surfaces.
A two-pack high-build modified epoxy zinc phosphate coating

Multi-functional epoxy coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5 as defined in ISO 12944, including industrial, oil&gas and infrastructure facilities exposed up to C5M as defined in ISO 12944-2. Not for immersion service.
A two-pack high-build modified epoxy coating containing zinc phosphate

For use as a coating of steel substrates in industrial and marine exposed conditions including offshore, splash zones and sub-sea environments, petrochemical, seaport and offshore.
A two-pack acrylic urethane topcoat

As a topcoat to give protection of steel as part of an anticorrosive coating system in severely corrosive environments up to C5-M as defined in ISO 12944-2 including industrial and infrastructure facilities. It has high-performance decorative properties and very good gloss and colour retention under UV rays.
A one-component penetrating water based primer 

Primer coat for concrete and dense mineral substrates such as fibre cement, foamed concrete, gypsum and building mortars. The material can be also used as a primer for application onto existing firmly bonded water based coatings.
A one-component plasto-elastic vapor-permeable water based coating based on styrene-acrylic dispersion

The coating is designed to protect and enhance exposed concrete surfaces. The material is used for protection and enhancement of concrete structures (normal and lightweight concrete), especially exposed concrete surfaces with a risk of cracking.
A two-pack epoxy phenolic coating

As an internal lining in tanks and vessels for brine, crude oil, refined products; suitable for insulated external carbon or stainless steel surfaces including equipment and pipework. Suitable for use at up to 180°C operating temperature (Dry Heat). Maximum temperature under insulation 150°C.
A two-pack high-build high-solids epoxy coating.

Provides corrosion protection in tanks, pipework and vessels containing a wide range of cargos: crude oil, refined products, potable water, ethanol.
Two-component, polyamide epoxy, zinc-rich coating.

It has a low VOC level and contains 85% by weight of zinc dust pigment in the dried film.
DURA-PLATE® 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy.

It can be applied without dew point restrictions and over wet steel surfaces. 301W shows good chemical and abrasion resistance and good edge-retentive properties. It can be applied over steel prepared by hydroblasting, grit blasting or mechanical tooling.
Abrasion Resistant Epoxy Primer

A two-component pure epoxy high solids product. It has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt water, fresh water, crude oil, alkalis and weak acids.
A high solids, tin free, polyurethane, with fast drying and high gloss attributes. For use where long term exterior gloss and colour retention characteristics are required.
A two pack isocyanate free finish based on an acrylic epoxy binder system.
5% discount on first order

When you sign up to receive news and special offers from O3!

Any questions? Write to us
We are in touch in WhatsApp +7 (926) 900-20-51
Мы на связи в WhatsApp +7 (926) 900-20-51